Technical details:
*no power supply included*
Dimensions: 170 x 355 x 355 mm (W x H x D)
Material: steel (body), plastic (front, lid)
Weight: approx.2.7 kg
Color: Black
Form factor: Micro-ATX, Mini-ITX
Fan possible:
1x 120 mm (front)
1x 120 mm (side part)
1x 80 mm (back)
Fan pre-installed:
1x 80 mm (rear; 1,800 rpm, 48 m³ / h, 21 dB (A))
Filter: power supply (removable)
Drive bays:
1x 5.25 inch (external)
1x 3.5 inch (external)
1x 2.5 inches (internal; bottom)
2x 2.5 inches or 1x 3.5 + 1x 2.5 inches (internal; side wall)
Power supply: 1x standard ATX (optional)
Expansion slots: 4
I / O panel:
1x USB 3.0 (internal connection)
2x USB 2.0 (internal connection)
1x per audio in / out
Maximum graphics card length: 320 mm
Maximum CPU cooler height: 145 mm
Product description:
Qs182 is a chic micro ATX case that impresses with its matte surface and subtle design. At approx. 33.5 cm in height and length, it is also a rather small housing, which also only weighs 2.7 kg and, in conjunction with the chic design, also looks great in a living room.
The small mini tower is made of 0.5 mm thick SECC steel and finished on the front and lid with plastic. The front houses a drive panel behind which a 5.25-inch slot is hidden as well as another for a floppy disk drive. There is also an I / O panel with a USB 3.0 port, two USB 2.0 ports, two audio sockets and a power and reset switch.
In the completely black interior of the Qs-182 there is space for motherboards in Micro-ATX and Mini-ITX format as well as some other components. For example, a 3.5-inch and a 2.5-inch drive can be installed in the Qs-182 as standard.
The 3.5-inch drive can also be an external one, since the slot sits behind a bezel that can be removed. In addition, either two additional 2.5-inch drives or a 2.5-inch and a 3.5-inch drive can be installed on the fold-out small side wall.
If you don't use a 5.25-inch drive, you can also install a 3.5-inch drive instead. So that the drives generate little or no vibration, the housing comes with rubber pads.
The housing can accommodate four expansion cards. These may have a maximum length of 320 mm. A CPU cooler can at least have a height of 145 mm. Of course, there is also a cutout for mounting and maintenance of the CPU cooler in the side wall. A standard ATX power supply can be installed in the back of the case. There is a removable dust filter underneath.
The case comes with a pre-installed 80mm fan in the back. For this purpose, a 120 mm fan can be installed in the side part and in the front. For optimal cable management, there are holes in the mainboard wall.
Heeft u vragen of kunt u niet vinden wat u zoekt? Wij helpen u graag.
Productspecificaties, afbeeldingen, voorraad zijn indicatief, hier kunnen geen rechten aan ontleend worden. Prijswijzigens en zetfouten onder voorbehoud. Prijzen zijn incl.btw en excl.verzendkosten. Alle specificaties kunnen zonder voorafgaande kennisgeving worden gewijzigd. Informeer bij cruz computer service voor het exacte aanbod.
SNELLE LEVERING
